Jump to content

BumBle02

Members
  • Posts

    162
  • Joined

  • Last visited

  • Days Won

    17

Posts posted by BumBle02

  1. post-2623-0-70063000-1536010346_thumb.jpg

    I have got one I will have. a look and see for you and let you know had a look no pump on it came of one with a filter on the front of the engine just look on eBay it is the same as mine it's a sender only and pick up and return the fuel pump is the one that feeds the injectors as well I just remembered there is a sensor on it just Under the alternator then they go there is no fuel it's called a fuel pressure regulator suction control valve the relay works this valve if you look at the picture on eBay on the injector pump it's on the left side with 3 screws holding it.

     

  2. I have got one I will have. a look and see for you and let you know had a look no pump on it came of one with a filter on the front of the engine just look on eBay it is the same as mine it's a sender only and pick up and return the fuel pump is the one that feeds the injectors as well I just remembered there is a sensor on it just Under the alternator then they go there is no fuel it's called a fuel pressure regulator suction control valve the relay works this valve if you look at the picture on eBay on the injector pump it's on the left side with 3 screws holding it.

  3. Just had the same trouble when the engine is hot the oil light would come on. It turned out to be one of to things I put on a good top quality oil filter and a new oil sensor and It's been all good since so I think it going to be buy the best and you should be ok all so put in some of that ZX1 Lub and it goes and lot better so it seems to work well.

  4. How to disconnect the valve for no cost and it works disconnect the vacuum pipe that is fitted to the side of the valve on mine the pipe goes to the top of the engine block connector disconnect it there and cap it so no vac lost the little bit of exhaust will fool the sensors. No engine light will come on it runs a lot better and oil stays cleaner and will pass a mot and good if your valve goes faulty on a CGY 2007 2.8 Cdr the one on front of Engine going to try a power box and KN filter to see if they work will let you know if they work.

×
×
  • Create New...