Semmysonic

Drove it a few days later and it was fine, error code says misfire, so I'm hoping it's a sensor playing up, it's being checked next week so fingers crossed it won't be so expensive

Drove it a short way today and the issue has gone, starting to think it's a sensor somewhere as apposed to something mechanicalmechanical, will try to get it checked this week and report back with the results

My 06 3.3 gas converted vovoyager is doing a similar thing, started on the motorway when it wouldn't kickdown . best way to describe is it Feels similar to the clutch slipping, only happens when in drive and reverse, smart issue on petrol or gas. Haven't had it checked out yet, looking for some ideas first.

Advice required, my 06 3.3 limited xs has started playing up.

It started on the motorway put my foot down to accelerate form 60 and it just started juddering (like it couldn't kick down) luckily not far from home, it was really struggling by the time I got home, sitting at lights it was just juddering, had to keep dropping into neutral. Got home and it actually stalled the engine whilst stationary and in gear.

Thanks on advance

No problem, just refitted mine yesterday and still a little bouncy, may have to redesign the rear brackets to attach to something more solid

Yes it's an auto. It goes to about 3000 and then drops to about 2000 then back up (over and over again) just seemed a little odd, never seen anything like it on other cars. As I say it drives fine, when in gear it revs as normal.

Thanks for replies

Is it normal that my 3.3 voyager won't rev up when in Park (revs to about 2.5k and then drops)

Only just noticed, the car runs fine otherwise

I've had problems with the boards fitted to my 06 stow and go,(fitted by previous owner) they seemed a little weak and bouncy on the back end.

Long story short the rear brackets had been bodged. But anyway I noticed the fitting instructions I found wouldn't have fitted to my car. The chassis is different to take accommodate the front row of seats in the floor.

You could fit them but only on 2 brackets and not 3 ( problem I have now )