BumBle02

Thanks you  I give it a go not much left but it was quiet before shocks were done could be new position let you know soon thanks again. Bumble

Well everybody found a easy solution take the blue radio antenna wire in to the engine department to the fuse box in side you will find a relay it's the one nearest to the head light wing side connect wire to pin 87 that will turn on the amp when you switch on the radio alternately you could put a accessory live wire in fuse box to 87 so it will activate it save running a wire though bulkhead. Bumble

All ok now now got  sorted sent me a petrol by mistake.

Got it thanks.

Hi Thank you Legonsuk for that got one straightaway can't see how it works but I'll soon find out how does it work is it easy to suss it out as I say thanks again Just been on youtube great tool will make life easier.

Hi Yes heve a look today see if it comes of like yours and yes I did the gearbox oil and filter the new pump was no help with the taking out the oil from the dipstick couldn't get a good amount of oil so did the usual way got oil on me again all ways do it but putting the oil in with the pump worked  well taking head lights out today for a polish up and it goes on thanks you the info. Had a idea with the suction pipe that goes in the sump got some small bore aluminium tube that might help with the oil suction as it's straight. Cut a angled corner at bottom as I think  the plastic tube is curling up in the sump will let you know if it is the case anything to make life easy.

Yes I just got one from eBay works a dream doing mine tomorrow will get oil over me if there is oil it loves me .

Yes I just got one from eBay works a dream doing mine tomorrow will get oil over me if there is oil it loves me .

Yes they are off Thank you to Bigniv  for is help with the roof bars. Bumble

Hi Just joined hello to all just got a Grand  voyager 2.8 crd on a 57 plate going going through all the sensors and filters oils etc big thanks to Andy for is youtube videos and chat with him. Just done the Map sensor manifold you could not see the tip makes you wonder how they ran like  that it definitely pays to check the things well let you know now things go.

Yes Andy on youtube do's a good one on fitting then.

Hi Just joined hello to all just got a Grand  voyager 2.8 crd on a 57 plate going going through all the sensors and filters oils etc big thanks to Andy for is youtube videos and chat with him. Just done the Map sensor manifold you could not see the tip makes you wonder how they ran like  that it definitely pays to check the things well let you know now things go.