Mopar666 Posted February 27, 2020 Report Share Posted February 27, 2020 (edited) Hi all , I’ve owned this car since it was 9 months old and apart from a rebuilt auto transmission the car has been very reliable , but now it has a couple of faults with from looking through the posts on here seem to be quite common , first is the ABS light is on , changed both front sensors and the control unit , the other is both remotes will not operate the car, everyhing else on the car works perfect , looking like the BCM ,?are these plug and play of do they have to be “added” to the car ? Any advice greatly received Edited February 28, 2020 by Mopar666 Quote Link to comment Share on other sites More sharing options...
bignev Posted February 27, 2020 Report Share Posted February 27, 2020 (edited) Hi there! Don't know any background, and it would be better in the vehicle assistance section, but have the reluctor rings, for the ABS sensors to see, on the drive stub shaft been checked? And I presume you mean both remotes have stopped working. If so initially have the batteries been changed? After that pull out the IOD fuse for half an hour to do a bit of a reset. Cos hell no a BCM is very much not plug and work, not a chance. Edited February 27, 2020 by bignev Quote Link to comment Share on other sites More sharing options...
Mopar666 Posted February 28, 2020 Author Report Share Posted February 28, 2020 (edited) Thanks for this, will try IOD fuse tomorrow Edited February 28, 2020 by Mopar666 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.