-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Calendar
Posts posted by emmit
-
-
What was the price of pro obd
Did you try the key dance. Is turn on and off four times didn't the codes show there on miles screen
Was for fixing fault sorry don't know
Oskin.RU/pub/chrysler- dodge/manuals
@ crispin thanks for the reply "What was the price of pro obd"...i'm using a borrowed autel MaxiDiag elite cost around $250.00 / £200..."Did you try the key dance"...no but I would really appreciate knowing the key sequence please
can you check this link please as all i get is page not found Oskin.RU/pub/chrysler- dodge/manuals
Hi all ive managed to clear all airbag and abs codes albiet but one?.. the rt/f/os drivers side sensor shows no signal to cab (abs module no traction control on this voyager..TG)uk model which i am working on now (i have already replaced this once with a used part from fleabay but have put back the org as i was guessing....good calculated guess i thought) i will probably run an a/c voltage check first to the rt/f o/s wheel sensor with both front wheels off and car on axle stands..if that shows no or not within the voltage needed i will check further up to the CAB ...not looking forward to that as it means removeing battery and tray..so i am lead to believe will return in 24 hrs health permiting
-
Thank you,update the cheapo OBD tool didnt find any faults so I have ordered a pro obd tool
hi i have found these fault codes
U3FF01 LEFT FRONT SENSOR FAILURE
U3FFFFF RIGHT FRONT WHEEL SPEED SENSOR SIGNAL FAILURE
U2DC501 CAB INTERNAL FAILURE
any idea's what i can do to fix them myself ...thank you
-
I would read the fault codes and find out the location/circuit of the fault before guessing here and there.
Thank you,update the cheapo OBD tool didnt find any faults so I have ordered a pro obd tool
-
by any chance does it go off after a few days of dry weather
if so front wheels off and take off the plastic inner arches 2 screws and a few plastic pull off plastic pins
top rear on body work theres a wire connector from wheels sensor
clean it check and solder wires if needed
clean the ring with the humps in just behind the front wheel bearing / disk this is abs wheel sensor
this has stopped mine coming on
Hi Crispinchurch ..Thank you for your comments..no it stays on I've had the car for 3 weeks now I after getting a repair manual I have done what you suggest and checked the 2 front connectors for continuity both okay I know this isnt a real test...I have also checked the 2 front sensors and cleaned the rust from both reluctor rings (both where heavily rusted almost bridged across with expanded corrosion ) painstakenly cleaned them to a sqare profile all 47 + 47 of them ..ABS light is still on..I have had delivered today Saturday a cheap OBD11 fault finder ..will try it out later and come back with results..meanwhile I am trying to find a list of faullt codes for the chrysler voyager 2003/2004 2.5 crd se luxe anniversary edition & where can I buy / source those plastic pull off plastic pins..looks like someones been under here before splash guards fixed with chewing gum & baling wire (well almost)Thanks again
-
hello all... just to say hi and hope to be an owner of ..so far an excellent machine One small problem {i hope} the ABS warning light has come on? so i will be working on it to sort it out....anybody who has experienced simular and would know the in's and outs would be appreciated..thank you ...emmit
Hello All I Have Just Bought A Chrysler Voyager 2003 2.5Crd Anniversary Edition
in Newbie Forum
Posted · Edited by emmit
thank you will try that now
do you or any one know the pin out details of the ABS Sensor connector at the CAB