and

Yes i agree but i must take some of the blame for not taking it further but i must bite the bullet he did say he had changed the servo as the brake pedal went hard every now and then but i will check further thanks again

Hi just change both front sensors and road tested abs warning lights have gone out but brake pedal is hard as tho there is no servo could it be a vacuum problem any ideas and thanks for all your help

Hi guys thanks for your replies i have ordered 2 front wheel sensors and a vacuum solenoid valve i will fit them asap when if evere it stops raining cheers guys

i am sure i replied yesterday if i did sorry i have ordered a solenoid valve but took it for a diagnostic yesterday on the way the abs light & traction light went out got it tested no fault codes were found or in the history on way back they came back on .drove about a mile this morning and lights went out went this afternoon lights back on any ideas cheers

Sorry if this is long as a first post and hope it is in the rite place Yesterday 7/11 i purchased a 2006 2.8 grand voyager all drove fine then after about 1hr red brake warning light came on as the car had been standing for a while i thought may be switch sticking but when i came to stop brakes worked great on 1st operation of pedal but on 2nd pedal went hard did stop but with no assist but when driven a while same again .THEN about 1hr after abs / traction off / lights came on but brakes did feel a bit better is this all related to one problem any help or thoughts will be great thanks Again sorry for the long post

Hi my name is steve i live in wolverhampton and retired i have not used these sites before so very new i have just purchased a grand voyager and it has thrown up a problem but hopefully can get it solved on here with all you guys help cheers steve