Handyman

Help please, For some reason the little light on the Air Recirculation button flashes a few times then goes out whenever I try to use it. Obviously this is handy when following a stinking vehicle in traffic. Does anyone have any ideas as to what is causing this please? Thanks in advance Further to this I have now found out that this happens when the air direction knob is set to screen and/or screen/floor ----DOH!

As I have a 2007 300c CRD with a damaged grey leather drivers seat I am contemplating swapping it over for another from a breakers yard. Our local car upholstery guy won't repair it for some reason. Is there a set procedure to remove the drivers seat? Should I disconnect the battery (if I do will I have to somehow enter codes into the REJ sat nav unit? - I don't have codes to do this) I want to avoid further complications with sat nav codes and error messages that would need to be cleared by a mechanic. Many thanks in advance. Dave

Hi, I have looked all over my lovely 300c for the paint code colour but alas cannot find it. It is a dark blue metallic (almost a gun metal blue/grey) colour (SEE ATTACHED PICTURE) . I need it to buy some touch up paint for chips and scratches etc. Also where to buy this would help too please. Thanks in advance Dave

Hi, When selecting reverse on my 2007 300c CRD the rear parking sensors work fine but how are the front parking sensors turned on? I don't think that mine are working because even after reversing and at low speeds moving forward, I hear no warning bleeps. Could there be a fault perhaps? Thanks in advance.

Hi Everyone, Got myself some new wheels last week - a Chrysler 300c CRD. I'm very pleased with it as you get a lot of car for not a lot of money. However now I look a little closer there are a few little bits and bobs I'd like to do to it to "tidy it up a bit". For example, on the driver's side I have 2 trim pieces halfway down along each door. these are black plastic with a chrome insert running along the top portiion of them. The trouble is one is coming unstuck and the other (the driver's door) the chrome bit is coming off at one end and no matter how hard I push, it won't go back on. It was then that I realised I was screwed as there are no Chrysler dealerships in the UK when I looked at replacing all 4 door trims and got a quote from a Jeep dealership of over £428!!!! So what do you do for parts...… import from USA? or what? Thanks in advance......