hundred

Thanks for that, for the cost it may be a worthwhile thing to do, however if I can get all 3 done in 25 mins I will be amazed. Thanks again. Going back to my original question, has anyone changed the matrix and if so is it a pig to do?

Winter is coming north of the wall and my GV is colder than a white walkers heart. I don't think it's the stat as the temp is still reaching just under half way as is the norm. Earlier this year I flushed the coolant and replaced the rad, also replenished fluids with HOAT and distilled. The A.C. has never worked and I have no plan on repairing this due to cost. My thought is that it may be the heater matrix However please feel free to share your opinion and suggestions, my question is - has anyone replaced the matrix, is it easy enough and has anyone done some pointers for completing the job. Thanks in advance Graham

thanks for the replies guys, tbh i forgot i had steering wheel controls so that looks like it may complicate matters. I think i will stick to the standard radio for now and do a little bit more research / await the howto. I dont use my car a great deal due to getting stupidly low economy (20mpg from the 2.8CRD) and was mainly wanting it so when my daughter is in the car on long journeys (regularly do Scotland to Doncaster) she will be able to play her music instead of listening to radio noise in the poor signal areas. Thanks again and does anyone knows if this economy is the norm or is my motor just a poor performer

Yeah thanks, my car doesnt have AUX connector or anything like that, its just like the one in this picture. Can anyone recommend a replacement that may fit and not require shed loads of rewiring, I was hoping it would just be a case of connecting an aftermarket radio, hopefully standard size with adaptor plate. I have found a stereo on ebay http://www.ebay.co.uk/itm/Chrysler-Grand-Voyager-DAB-Radio-Pioneer-stereo-DAB-USB-player-DAB-aerial/132258541630?hash=item1ecb39303e:g:qiMAAOSw7PJZZgRO it says it is suitable but reading previous posts on here has made me a bit wary Thanks Graham

Hi I have seen numerous posts with regards to the stereo system in the GV and how difficult it is to upgrade to an aftermarket unit, however these threads all seem to be related to the stereos that have DVD, nav etc. My stereo is just a bog standard CD/Radio with no DVD, etc. Is it still just as much of a pain to change over or more straight forward, all I want to do is add a stereo with USB that will allow me to play music off my phone. Any help is much appreciated

Managed to get 2 turns on it, seems to be operating better, hand brake is still useless though, new discs, pads, shoes, cable and all adjusted and I can still push it when up as far as I can get the lever. MOT due on Monday as well, oh the joys

This is my assembly at the minute

Hi I have read all the topics on this subject and have an issue. Couple of months ago I did all brakes on car, front and rear including new shoes and fitting kit for hand brake, anyway I snapped the front handbrake cable when testing (foolishly). I have now fitted a new cable but can't get it to take, looking at it I think my clock spring has come unsprung, can anyone advise if this is the case and if so what do I do to sort? Will try to put pictur3 on of my assembly Thanks in advance Graham

No bearings are fine, smooth as a nut. Going to have another play today, I'm going to be able to strip these down blindfolded after the amount of times they have been off recently

So new calipers fitted and still the overheating issue. What I have noticed is that I cannot get the wheels to run freely when up on the stands no matter what I do. Beginning to lose patience now. I can't take it to any local garages as none of them will work on it

Am pretty handy and am sure I could overhaul the existing caliper but going away tomorrow so just got a pair of reconditioned caliper from ECP, managed to haggle them down to £250 with £60 to be returned as surcharge. Only got this motor as a cheap run around in stead of getting a new car on finance. Costs me a fortune in parts and at 18mpg it would have been cheaper to get the new car.

How easy is it to rebuild the caliper? Can't afford £300+ for 2 new caliper

No it is happening on both wheels. I have fully wound the shoes in to discount that but no joy. May have to get the caliper rebuild kit ordered

Hi I have just fitted new discs, pads and shoes to my 2006 GV 2.8crd stow and Go but they are getting very hot after driving for 20 minutes. I have stripped them down a few times as I can't figure out what is causing it. All parts are new, even fitted new small parts kit to the shoes. The calipers are running freely and the posting have been lithium greased before depressing piston back in. Any ideas what it could be as no garages in my area will touch Chrysler brakes as they are a pig to work on - which I tend to agree with. Also can anyone advise where I can get a new front handbrake cable from without going to main dealer as they want to charge me daft money. Any help greatly appreciated

Hi all, Just bought a 2006 2.8 CRD GV after borrowing my brother in laws Voyager 2.5 and find it perfect for my needs. As i am unsure of history have done a full service and also plan to replace transmission fluid and fully flush coolant. The car runs great but when on a motorway or driving uphill for a prolonged time the car overheats, after checking the forum i have found this to be a common problem so I have a brand new radiator, deionised water and Comma G05 coolant to change. However i am unable to drain the full 14litres of fluid, i can only manage to get about 5 litres and that is with me jacking the car up at the back to hope gravity will help. Any advise for a full drain please