Newdelta

No, it never said anything regarding Chrysler or Lancia.

I have, back to the garage.

Mine got worse and worse and they could not get to the bottom of it. With 6 months warranty left and no fault code I have got rid. Got to the point the turbo was spooling back on full acceleration and some times doing 3 judders in quick succession.

Hi, I never had nav, Just Blue and me.

Hi, I did it with lancia and guess what it started to speak Italian. The good news is I then installed the UK Language pack. http://www.blueandme.net/resources/download/APPLICATIVI/Cambio_Lingua/Page/Html_Lingue/index_en.html

Hi, Repaint is the only option, but mobile phone screen protectors seem to work well. Just cut them to shape.

It goes for an overnight stay in September. I go on holiday in it tomorrow, bloody hope it does not go wrong. Breakdown cover taken out just in case.

I may try it the other way and screw them out, perhaps they are not exerting enough pressure so are moving as I drive?

They are screwed in to the maximum.

@@Brendon1977 Have got them to confirm it should not be doing it. They are getting Fiat technical specialists in to show them (presume their is a crack team of fiat engineers somewhere) will be a couple of weeks before they come in and I get the info back with what is wrong with it.

Commute was fine, so looks like MAF or ERG.

Disconnect the electrics your MAF (left of the turbo) and go for a short spin. I have tried this and the car worked great and seemed quicker and more responsive and the awful "darth vader" chatter off acceleration has gone. (further test to follow as I am going to leave it off for my home commute of 15 miles) At least that has proven there is an issue. It is now going in for an ERG clean and possible MAF replacement tomorrow.

I have checked my pipes today and the pipe going into my turbo is not off but it is lose, I can't pull it off but can move it side to side about 1cm. But it looks like it has been like that for a bit as it has polished the metal on the connector on the turbo. If that likely my problem, is yours the same?

http://s30.postimg.org/totjgokwh/WP_20140814_002.jpg Not the best as I have put a bit of new paint with new stickers on today but you can see where it has already indented. The other side gets worse but I have put a part of a mobile phone protector on that side on top of the sticker and that is holding up better tonight.

Does anyone else's boot stops wear through their paint. I had my worn areas repainted last year and they have done it again! Is there an alternative stop available as at the moment I am using vinyl stickers but they only last about 6 months before the stops eat through them.