Jump to content
  • 0

2012 G/voyager Cutting Out


Glassman100
 Share

Question

Hi, I have a 2012 Chrysler Grand Voyager and the engine is cutting out without any type of warning. When this happens I stop the car, put it into park and it re-starts as if nothing was wrong at all! It can go for many hundreds of miles or half a mile before it happens again. The engine management light does not come on at all so the problem does not register!

 

Any ideas please??

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0

Hi Glassman

 

Well, if you are DIY guy and have some tolls, you can play with it.

 

1. Fuel filter(easiest)

2. Secure the car on 2-3 jacks stands with front lifted, handbrake on.

- put in in to the 1st gear

- foot down (I used brick or stick) up to 3.5k revs minimum.

- then check if the common rail return valve is leaking.

- if it does let any diesel out, replace it.

 

 

You can also check you MAP sensor and give it a good clean from the gunk.

 

 

If they car was not driven, daily or never had a chance to warm up there is a chance that ECU near the battery is corroded.

Corrosion takes months/Years to build up

 

 

Remove, open it, inspect it, then give to local INDI that fixes TV so he can check all tracks for you.

 

 

All the best.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...