Jump to content
  • 0

2008- grand voyager 2.8 crd limited edition Parking break not working


Les
 Share

Question

My parking brake has failed mot, I have replaced the calliper (disk brake with pads does not have shoes) as it was naff.

Still no joy, the calliper is auto adjust, as is the handbrake cable. I can find no way to adjust the cable or calliper manually. 

The different between rhs and lhs is 60%

im not sure if replacing the cable will help, to be honest I never use handbrake so I cannot see it stretching since last year.

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Hi Les

I am guessing you might have fixed this now but I have the same vehicle as yourself and had the same problem. What did work was to take the rear wheel off and rotor and adjust the small star like adjustment screw situated on the underside of the wheel hub. I adjusted this so the shoes pressed tight against the inside of the rotor with the handbrake off. Then went for a short spin, applying the handbrake at the same time. Prior to this adjustment the car would move forward about an inch when the handbrake was applied, so this did solve my problem and no issue with passing MOT.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...