Workshop Manual ?

[kielykid64]

Hi everyone, I have a 2009 black card with 52K on the clock. My wife derives it mostly, I really like it a lot fabulous standard equipment right down to the cooler for my drink.

Of late I was unfortunate to have the starter Motor sheer off about 9 teeth from the flywheel. So I need to do a lot of work to the car. I intend to do the timing belt and water pump when I have so much ripping to do anyway. I first got the car at 24K .When I dropped the cowling under the engine I noticed a very slight inlet turbo leak . I need to change this o_ring also.

I know at this stage some of you are getting misty eyed but this car has cost nothing to maintain for the last 2 years apart from full service every 10k. I really think they are a great buy.

Anyway I tried to get "work shop manual" but all I can find is a glove box owner's manual.

 

If Someone could help with the torque settings etc.

Also useful tip the starter is the same as a Mitsubishi outlander.

Thanks,

Maurice.

[kielykid64]

Hi again.

Does anyone know what Model and number VW engine is used in the 2009 CRD Sebring ?

I should get the toque settings from that wearing my Wv hat.

Also what model Mitsubishi manual box.

Surely there must be some data out there .

Thanks.

Maurice.

[jonnoj]

I'm not certain, but I think the engine is mercades not vw. Or at least that's what the previous owner told me and dodge brought engines off mercades so there's a chance? Let me know if you find anything out for sure please?