Foggieloon Posted June 22, 2019 Report Share Posted June 22, 2019 I have a 2011 grand voyager limited.Today I attempted to start the engine as normal and nothing happened!The electrics were all working and the gear shift was stuck in park!I waited for a few minutes then after a few more attempts the engine started.What could cause this to happen?The car was in a garage recently for reversing camera issue( not fixed)They found fault codes P0562 and P0850Could this be related?Any advice would be much appreciated. Quote Link to comment Share on other sites More sharing options...
0 Orangecrumble Posted June 30, 2019 Report Share Posted June 30, 2019 P0562 is set when battery voltage is 10.5v or less for 20 seconds. Hope this helps Quote Link to comment Share on other sites More sharing options...
0 Orangecrumble Posted June 30, 2019 Report Share Posted June 30, 2019 Also was on some jeep forums where they used appcar diag FCA to flash in non standard reverse cameras. Didn't read details but might be worth looking into. Quote Link to comment Share on other sites More sharing options...
Question
Foggieloon
I have a 2011 grand voyager limited.
Today I attempted to start the engine as normal and nothing happened!
The electrics were all working and the gear shift was stuck in park!
I waited for a few minutes then after a few more attempts the engine started.
What could cause this to happen?
The car was in a garage recently for reversing camera issue( not fixed)
They found fault codes P0562 and P0850
Could this be related?
Any advice would be much appreciated.
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.