Jump to content
  • 0

AndrewSpa
 Share

Question

I am looking for a workshop manual for my 2010 Chrysler Grand Voyager 2.8 CRD. (5th Gen)

I need to replace the front aircon evaporator. I do not want to damage the dashboard , so I would like to strip according to the manual.

 

Also the car vibrates at idle. All four engine and gearbox mountings were broken , so I replaced them with polyurethane mountings and the car is better , but still vibrates. I suspect the mountings may be too hard , but the car idles at around 700 rpm and if I pick the revs up to 950-ish rpm it stabilizes.

 

The fuel pressure regulator is also apparently faulty. I have just bought one and I am wondering if that isn't why the idling seems low.

 

Workshop manual will be greatly appreciated. 

 

Thank you in advance

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...