Jump to content
  • 0

Grand Voyager 2.8 Crd Exhaust Replacement


hacka1979
 Share

Question

Hi everyone,

 

I have recently bought a 2007 GV which needs a little work doing.  One of things on my list is to completely replace the exhaust system as it looks in generally poor condition and the last 2 MOTs have noted an advisory about a front end exhaust gas leak.  Has anyone attempted this themselves and any advice on where to source the parts ?   I'm quite handy with a set of spanners but would be doing the work on my driveway at home so access will be limited.

 

Any advice greatly appreciated  :).

 

Thanks

Adam

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

Hi, I didn't replace the exhaust but I replaced my engine and to do that I needed to disconnect the exhaust from the manifold.

That is the most difficult place to reach on the exhaust.

The car needs to be high up ( I used a friend's garage to lift the car up), you should get a set of decent stands.

You need a long (I used two) extension for the four 10mm bolts. They can break so apply wd40 first and leave it for a while to suck in

My advice if you want, replace the gasket and don't use any gasket sealant ( you probably know that already)

 

Hope it help.

Link to comment
Share on other sites

  • 0

Must add here as I've a spare exhaust hanging from my rafters in the loft, got it from Fleebay quite a few years ago as I had a few holes in one of the boxes. But as I said looked for an easy way out and bandage did the job. Maybe not next time though..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...