Jump to content
  • 0

Dipped Head Lights Issue On Chrysler 300C


Madmel55
 Share

Question

Hi I have a problem with my dipped HID beam (both sides) on my Chrysler 300c in that they start in the normal position then in about 2 to 10 minutes they drop very low. I have changed the bulbs, Ballasts, HID controller, has anybody got any other suggestions as to what could be causing this please.


 


Madmel55

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

...only assumtions:

Because they both do it, it is not at the end of the circuit, ie motors.

I bet they come with self levelling (or auto levelling).

I would look for the module that controls that, has nothing to do with the ballast and/or lamps, it is a module that I assume it works with mercury and so when you have full car (passengers and stuff in the boot) it will drop the angle down to a certain degree so the lights won't affect the incoming drivers.

I personally don't have one and not familiar with the model (even though I wish I buy one...is just never the right time) but follow this lnik and see if you get it.

You will have two sensors that will send info to a module, one of the three is faulty.

 

 

http://www.300cforums.com/forums/uk-europe-regional-forum/115273-hid-auto-leveling-module-question.html#/topics/115273

 

Hope it helps.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...