Gerrycat53 Posted July 3, 2017 Report Share Posted July 3, 2017 Hi there all, my name is Gerry & am front Kent England, I have an ABS problem & wanted to known if anyone has had the same problem & what the cure is, she is a 300c 2007 CRD, I was working on her doing the ball joints etc whilst listening to the radio, when I had finished & went to move the car, the battery was flat, I asked my friend to give me a jump start & ever since that, I have all three ABS lights on, also she is now hard to start in the mornings when cold, I have had it checked out & been told glow plugs or glow plug module or both at fault, I have been laid off work for medical reasons so can not afford to take her to a Chrysler dealer, can anyone help me please ? Kind regards Gerry. Quote Link to comment Share on other sites More sharing options...
PaulHammond01 Posted September 16, 2017 Report Share Posted September 16, 2017 You can to the glow plugs your self, look on you tube it will show you and buy the plugs of eBay, can't fault any of them at all. As for the Abs, check the ABS sensors or with a vault meter, also I had the lights for the ABS on for over a year and it ended up being the main bolt that holds the axle etc all in place, my garage just tightening it and it was all sorted. I have heard of other things regarding the ABS lights such as a cable which runs under the car and over the years it rubs on a A/C pipe and wears that cable down. Just a little bit of insulation tape will do the job. Regards Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.